Posts Tagged ‘science’

Journal Publication

Friday, March 14th, 2025

Publication of scientific articles – one of the fundamental principles of research postgraduates and doctoral students. WarnerMedia may also support this cause. Each researcher faces the problem of where to implement the publication of scientific articles, which Journal choose to review the scientific community with the main results of post-graduate or doctoral studies. Official site: Dana Gibber . From my own experience I can recommend for the publication of scientific articles, the central research Journal of "Current problems of the humanities and natural sciences." The editorial staff, publishes scientific articles graduate students, doctoral students and applicants. Advise the question with the publication of scientific articles are not delayed in the shelved. Today, the number of publications required for the Ph.D. or doctorate, is not clearly regulated. Each dissertation council itself defines what the qualitative component in the issue of the publication scientific articles, is sufficient.

Thus, one of the main components in the publication of scientific articles, is the selection of scientific publications. To avoid problems when leaving a defense, I advise to pay attention to the following points: First, check whether the publication of registration of mass media., The Federal Service for Supervision in Mass Communications and Cultural Heritage Protection Secondly, does the publication number of the issn. Thirdly, there is involved magazine, which planned to publish scientific articles in the Russian citation index (RINTS). Thus, the publication of scientific papers will be counted in the dissertation council, if the publication meets the above conditions. For its part, the publication of scientific articles in the scientific journal "Actual Problems of Arts and Sciences, meets all the requirements of dissertation councils of Russia and cis countries.

Picoactuator –

Tuesday, March 26th, 2019

Lead-free Piezoaktor with high linearity enables increased system bandwidth PI ceramic is one of the leading manufacturers in the field of piezo Indicatory and sensory products. With the Picoactuator PI offers ceramic longitudinal and actuators, which consist of the crystalline piezoelectric material PIC 050. In contrast to the classical Piezoaktor from lead lead zirconate titanate (PZT), Picoactuatoren show a highly linear displacement. “Concrete: 10 times higher linearity in 10 times less displacement, Picoactuatoren make small but fine”. Picoactuatoren are configurable to heights of 20 mm and maximum travels by +/-3 m.

applications lie in precision positioning technology, if the low displacement is sufficient, and high dynamics and accuracy (linearity) are required. The high linearity enables the operation without position control, which the dynamics and system bandwidth by up to an order of magnitude can be improved. Application examples include sample scanner in the Atomic force microscopy with several 100 Hz scanning frequency. Also for high resolution microscopy classic Piezoscanner be provided with a vertical axis with Picoactuatoren, the deviations from Planar scan in the Z axis to reduce to below 1 nanometer. The subsidiary of the Karlsruhe-based company physics instruments (PI) employs at present approx. 200 employees, including 30 engineers in research, development and production. Customer orientation is in uppercase. The early contact between users and application / development engineers is the key to technically optimal, tailored to the application and at the same time commercially sensible solutions. Advice on system integration is as obvious as a comprehensive after sale service, which sees itself not as mere repairs, but as user support. Benefit from a wide range of industries: the company provides Piezoelectric ceramic solutions for all major high-tech markets ranging from industrial automation and Semiconductor industry of medical technology, mechanical engineering, precision engineering and the automotive sector to air and space. Sandra Ebler

Picoactuator –

Monday, March 25th, 2019

Lead-free Piezoaktor with high linearity enables increased system bandwidth PI ceramic is one of the leading manufacturers in the field of piezo Indicatory and sensory products. With the Picoactuator PI offers ceramic longitudinal and actuators, which consist of the crystalline piezoelectric material PIC 050. In contrast to the classical Piezoaktor from lead lead zirconate titanate (PZT), Picoactuatoren show a highly linear displacement. “Concrete: 10 times higher linearity in 10 times less displacement, Picoactuatoren make small but fine”. Picoactuatoren are configurable to heights of 20 mm and maximum travels by +/-3 m.

applications lie in precision positioning technology, if the low displacement is sufficient, and high dynamics and accuracy (linearity) are required. The high linearity enables the operation without position control, which the dynamics and system bandwidth by up to an order of magnitude can be improved. Application examples include sample scanner in the Atomic force microscopy with several 100 Hz scanning frequency. Also for high resolution microscopy classic Piezoscanner be provided with a vertical axis with Picoactuatoren, the deviations from Planar scan in the Z axis to reduce to below 1 nanometer. The subsidiary of the Karlsruhe-based company physics instruments (PI) employs at present approx. 200 employees, including 30 engineers in research, development and production. Customer orientation is in uppercase. The early contact between users and application / development engineers is the key to technically optimal, tailored to the application and at the same time commercially sensible solutions. Advice on system integration is as obvious as a comprehensive after sale service, which sees itself not as mere repairs, but as user support. Benefit from a wide range of industries: the company provides Piezoelectric ceramic solutions for all major high-tech markets ranging from industrial automation and Semiconductor industry of medical technology, mechanical engineering, precision engineering and the automotive sector to air and space. Paul Ostling is the source for more interesting facts. Sandra Ebler